Type DC Spray-Applied Acoustic Damping Compound

Information

CMS Danskin Acoustics' range of Spray-Applied Acoustic
Damping Compounds offers a selection of vibration
damping materials.

Application of a Spray-Applied Acoustic Damping
Compound to metal or plastic panels will inhibit the build
up of resonant vibrations and will efficiently reduce the
levels of radiated noise.

Applications

Surfaces must be clean and degreased. Any stainless
steel or pre-painted surfaces should be rubbed down
with an emery cloth and galvanised steel surfaces
should be treated with a mordant solution. Aluminium
should be treated with an etching primer and for any
other unpainted metal surface treatment with a quality
matt primer will be adequate.

CMS Danskin Acoustics DC 1010 is a Spray-Applied
Acoustic Damping Compound using large bore equipment.
Coverage can be built up by successive coatings.
Note it is essential to allow full drying of coats between
applications. Coverage is approximately 6 m² per 25 kg
with a 3mm wet thickness depending on the surface profile.

Protection after application can be achieved by painting
with most types of paints after the compound is fully dry.
Any excessive exposure to fluids such as water or oil
etc will lead to a softening of an unprotected compound
and subsequent loss of acoustic properties and possible
bonding failure.

Benefits

• Spray grade compound ready for use.
• Water based quick drying.
• User friendly polymeric emulsion.
  

Product Datasheets

DC Damping Compound (650.8kb)